Custom structural framing for LED video wall systems — engineered to the panel, the venue, and the install method — then fabricated, installed, and commissioned on site by the same team.
We design and build the structural frame, install it on site, fit the panels to it, and commission the display — from mechanical sign-off through to full technical commissioning (power-up, controller/processor configuration, calibration, testing) — scoped to what each integrator needs on that job.
We don't sell or source LED panels. The integrator specs and supplies the display — we handle the structure, the physical install, and the commissioning around it.
Commissioning on our LED projects is handled directly by our commissioning lead — 25 years' hands-on experience with LED displays and video processing systems.
Freestanding structural frames for outdoor and event LED walls, engineered for wind load and rapid bump-in/bump-out.
Two display faces angled back-to-back on a shared monopole — maximum traffic coverage off a single footprint. One of our most requested structure types.
Permanent architectural mounting frames for retail, corporate, broadcast, and venue installations.
Non-standard shapes and curved configurations fabricated to match panel radius specifications.
Rear-access frame designs, cable management, and weatherproof enclosures for outdoor deployments.
[Confirm if TS Fabrication offers flight-case-compatible or modular touring frame builds.]
Send us the panel manufacturer specs, quantity, configuration, and site details (or venue drawings). We confirm load, mounting, and access requirements.
[Confirm design process — in-house CAD, third-party structural engineering sign-off, standards referenced (e.g. AS/NZS), etc.]
Frame is cut, welded, and finished in-house to the confirmed drawings and tolerances.
[Confirm finishing options offered — powder coat, galvanising, raw/painted steel, colour matching, etc.]
| Attribute | Detail |
|---|---|
| Panel systems worked with | [LED panel brands/systems you have fabrication experience with, e.g. Absen, Novastar, ROE, Unilumin — confirm before publishing] |
| Materials | [Mild steel / aluminium / stainless — confirm standard stock and when each is used] |
| Finish options | [Powder coat (colour range), galvanised, raw] |
| Load rating / engineering sign-off | [Confirm whether structural sign-off is provided, and by whom] |
| Typical lead time | [Confirm standard turnaround from approved drawing to delivery] |
Frame is delivered to site and installed, then the LED panels (supplied by the integrator) are fitted and secured to it by our crew.
Display is powered up, tested, and commissioned by our commissioning lead — 25 years' experience with LED displays and video processing — ranging from mechanical sign-off to full technical commissioning (controller/processor configuration, calibration), depending on what the integrator needs handled.
[Confirm post-install support — call-outs, maintenance, warranty terms.]
| Attribute | Detail |
|---|---|
| Panel supply | Not supplied by TS Fabrication — we install and commission panels specced and supplied by the integrator. |
| Fit-up / alignment tolerance | [Confirm typical mounting/alignment tolerance offered on site] |
| Weatherproofing / IP rating | [Confirm outdoor enclosure IP rating capability] |
| Commissioning scope default | [Confirm default: mechanical sign-off only, or full technical commissioning as standard — with the other offered as an add-on] |
Every placeholder row above needs a real, verifiable answer before this page goes live — integrators will use these tables to shortlist or rule you out.
Panel dimensions, quantity, and venue details — we'll respond with a fabrication, install, and commissioning proposal.